
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-20B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X60-20B is a double-acting compact cylinder featuring an external extend stop, allowing you to dial the forward stroke between 40 and 60 mm directly at the machine. It uses a short riveted body to minimize axial mounting depth where larger profile or round-body units fail to fit. The M20x1.5 adjuster screw sets the mechanical end position without shims or part changes.
This specific SKU includes a male M22x1.5 piston rod thread and lacks a piston magnet, meaning it cannot support reed or electronic switches. End-of-travel deceleration is handled by a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 60 mm |
| Adjustable range | 40 – 60 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Ideal for press operations needing exact insertion depth, letting operators tweak the 40-60 mm extend stop on the fly to accommodate material tolerances without swapping parts.
Choose this model if your fixture requires precise on-site extend tuning between 40 and 60 mm.
Confirm the 80 mm bore, 60 mm maximum stroke, 20 mm adjustment window, and PT3/8 air port. This variant features a male M22x1.5 rod end and no magnet. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston drifts and the bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 513 kgf at 1.0 MPa.
Turning the M20x1.5 adjuster screw shortens the forward stroke by up to 20 mm, setting the extend stop anywhere between 40 and 60 mm. The retract stroke remains full, and the screw acts only as a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.