verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-40SB

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-40SB is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 60 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke60 mm
  • Adjustable range20–60 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$137.48 $144.98Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-40SB

The AirTAC SDAJ80X60-40SB is a compact double-acting double-rod cylinder built for tight axial footprints, utilizing a riveted body design that saves mounting depth where larger profile variants fail to fit. An external M20x1.5 adjustment screw lets you dial the extend stop directly on the machine, shortening the forward stroke by up to 40 mm to yield a usable 20-60 mm range without swapping shims or components.

This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches and a male M22x1.5 threaded rod end for secure external mounting.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-40SB Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-40SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke60 mm
Adjustable range20 – 60 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-40SB

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×60Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-40SB Is Used

sync_alt

Changeover-Intensive Lines

Rapidly adjust the forward stroke for different product formats, using the male M22x1.5 rod thread to securely attach changeable tooling while maintaining compact depth.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-40SB the Right Cylinder?

Confirm the 80 mm bore, 60 mm max stroke, 40 mm adjust window, PT3/8 port, male M22x1.5 rod thread, and the -S magnet for your setup. Remember that a plain cylinder does not hold position if air is lost or the valve centers; the fixed NBR bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 20–60 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-40SB FAQ

It operates at 30-500 mm/s, accepts up to 1.0 MPa operating pressure, and functions between -20 and +70 C.

The external M20x1.5 screw shortens the extend end-position by up to 40 mm, allowing the stroke to be set anywhere between 20 and 60 mm on the machine. The included -S magnet enables position sensing with AirTAC reed or electronic switches, while the fixed NBR bumper decelerates the stroke end without acting as a mid-stroke lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-40SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X60-40SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.