Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-50B
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-50B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 60 mm on the machine — no shims, no part change.
- BoreØ80 mm
- Max stroke60 mm
- Adjustable range10–60 mm
- Adjuster threadM20×1.5
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-50B
The AirTAC SDAJ80X60-50B is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the R (M20x1.5) screw, you can dial the forward stroke down by up to 50 mm directly on the machine, yielding a usable extend range of 10 to 60 mm without changing parts. The adjuster dictates the end position, so output force remains identical to a standard SDA of this bore, delivering 2513.3 N of push at 0.5 MPa.
This variant includes a male M22x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without upgrading to the -S option. Its short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-50B Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 60 mm |
| Adjustable range | 10 – 60 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-50B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-50B Is Used
Press Fit Depth Calibration
Dial in the exact 10 to 60 mm insertion depth for heavy press fits using the M20x1.5 adjuster, leveraging the 2513.3 N push force to seat bearings without over-traveling.
Variable Height Stops
Adjust the extend position on the fly for product changeovers in lifting stations, utilizing the 128.1 kg vertical lift capacity safely within the compact riveted body footprint.
Heavy Clamping Setup
Fine-tune the clamping reach during machine commissioning to prevent crushing delicate workpieces, relying on the fixed NBR bumper to absorb the final end shock.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-50B the Right Cylinder?
When sizing this 80 mm bore, evaluate your neighbours: stepping down to the SDAJ63 yields 1558.6 N push at 0.5 MPa, while the larger SDAJ100 provides 3927 N. This model delivers a safe working load of roughly 1508 N (about 60 percent of its 0.5 MPa rating) and can vertically lift approximately 128.1 kg with a 2:1 safety margin. Choose this specific unit if your fixture requires on-site stroke tuning between 10 and 60 mm and utilizes a male M22x1.5 rod end.
Confirm your parameters: 80 mm bore, 60 mm max stroke, 50 mm adjust window, PT3/8 port, no magnet, and male rod thread. Remember that a plain cylinder drifts when air is lost or the valve is centered, as the fixed bumper only decelerates near the end and the R screw acts as a mechanical stop, not a lock. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 10–60 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M20×1.5 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-50B FAQ
At 0.5 MPa this 80 mm bore cylinder provides 2513.3 N push and 2267.8 N pull. At 0.7 MPa it delivers 3518.6 N push and 3175 N pull. The theoretical maximum push is 513 kgf at 1.0 MPa.
Turning the external M20x1.5 screw shortens the extend stroke by up to 50 mm, allowing you to set the forward stop anywhere between 10 and 60 mm. This mechanism only sets the stop position and does not alter the output force or lock the piston mid-stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-50B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.