
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-50SB is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X60-50SB is a compact double-acting double-rod cylinder built for on-site stroke tuning. An external M20x1.5 adjuster screw lets you dial the extend stop down from 60 mm to 10 mm without swapping shims or parts.
This 80 mm bore unit features a short riveted body that saves axial mounting depth where round-body or profile cylinders cannot fit. It includes a built-in piston magnet for AirTAC reed or electronic switches and a male M22x1.5 piston rod thread. A fixed NBR bumper at each end decelerates the stroke end; it is not an adjustable air cushion or a mid-stroke lock.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-50SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 60 mm |
| Adjustable range | 10 – 60 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the diverter position on the fly for varying pallet widths, using the male M22x1.5 rod end to secure heavy custom tooling precisely.
Choose this specific configuration when your setup requires frequent changeovers or trial positioning that benefits from a 10 to 60 mm adjustable extend window.
Confirm the 80 mm bore, 60 mm stroke, 50 mm window, PT3/8 port, -S magnet, and -B male rod thread meet your footprint requirements. Note that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts and the fixed bumper only decelerates near the end of the stroke. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa the push is 3518.6 N and the pull is 3175 N. The theoretical maximum push is 513 kgf at 1.0 MPa.
The M20x1.5 screw shortens the extend stop by up to 50 mm, yielding a usable 10 to 60 mm extend range. The -S code means a built-in magnet is present for direct mounting of AirTAC reed or electronic solid-state switches along the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.