
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-75S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X60-75S is a compact double-acting double-rod cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop from 0 to 60 mm directly on your machine. The short riveted body drastically reduces axial mounting depth where a larger profile cylinder cannot fit.
End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. This unit includes a built-in piston magnet for direct mounting of AirTAC reed or electronic switches along the body grooves. Operating speed ranges from 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 60 mm |
| Adjustable range | 0 – 60 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop in 0-60 mm increments to set precise pressing depths for heavy bearings without swapping mechanical shims.
Safely lift loads up to 128.1 kg and fine-tune the upper stop position, relying on the fixed NBR bumper to absorb end shocks.
This specific configuration (60 mm stroke, 75 mm window, PT3/8 port, female M14x1.5 rod thread, -S magnet) is ideal for lines requiring frequent on-site stroke tuning during product changeovers. Remember that a plain cylinder does not hold position on air loss or valve centering; the bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
At 0.5 MPa, push force is 2513.3 N and pull is 2267.8 N. At 0.7 MPa, push is 3518.6 N and pull is 3175 N. The theoretical maximum push is 513 kgf at 1.0 MPa.
The M20x1.5 adjuster screw shortens the extend stop by up to 75 mm, yielding a usable 0-60 mm extend range. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.