
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-10S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X65-10S is a compact double-acting double-rod cylinder engineered for on-site extend-stop tuning. An external M20x1.5 adjustment screw lets you dial the outward stroke anywhere between 55 and 65 mm, eliminating the need for shims or part swaps during machine commissioning.
This 80 mm bore actuator features a short riveted body that conserves axial mounting depth where larger profile or round-body units cannot fit. It integrates a fixed NBR bumper to absorb end-of-travel shock and includes a built-in piston magnet for position sensing. Operating pressure spans 0.15 to 1.0 MPa, and the unit relies on a PT3/8 air port to cycle within a 30-500 mm/s speed range.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 65 mm |
| Adjustable range | 55 – 65 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Sets precise bottoming depth for heavy pressing tasks, letting the M20x1.5 screw fine-tune the stop without swapping out the entire actuator body.
Fits into tight machine frames using the compact riveted body to deliver 513 kgf max push while clearing spatial constraints where longer cylinders fail.
Choosing this 80 mm bore makes sense when your application requires substantial thrust but demands a shorter overall footprint.
Operators who need precise 55 to 65 mm extend endpoints without mechanical part changes will benefit from the M20x1.5 adjuster. Confirm your setup requires a 65 mm maximum stroke with a 10 mm window, a PT3/8 port, and the -S magnet for AirTAC reed or electronic switches. Remember that the fixed NBR bumper decelerates the stroke end but does not function as a lock; if you need to hold a load vertically without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The M20x1.5 screw shortens the extend stop by up to 10 mm, giving a usable 55-65 mm outward range while retract remains full. The built-in -S magnet works with AirTAC reed or electronic switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.