verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-20S

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-20S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 65 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke65 mm
  • Adjustable range45–65 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$141.20 $148.70Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-20S

The AirTAC SDAJ80X65-20S is a compact double-acting double-rod cylinder featuring an external M20x1.5 adjustment screw that lets you dial the extend stop anywhere between 45 and 65 mm directly on the machine. The short riveted body significantly reduces axial mounting depth, fitting where larger profile or round-body cylinders cannot.

End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. This specific unit includes a built-in piston magnet (-S), allowing you to track position with AirTAC reed or electronic solid-state switches housed in the body sensor grooves. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-20S Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-20S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke65 mm
Adjustable range45 – 65 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-20S

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×65Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-20S Is Used

sync_alt

Changeover Positioning

Speed up production line changeovers by turning the external adjuster to match new product lengths, relying on the fixed NBR bumper to absorb end shock.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-20S the Right Cylinder?

When sizing this 80 mm bore actuator, moving down to an SDAJ63 reduces the 0.5 MPa push force to 1558.6 N, whereas stepping up to an SDAJ100 increases it to 3927 N. Choose this model when your fixture requires frequent on-site stroke tuning during changeovers.

This configuration specifies a 65 mm maximum stroke with a 20 mm adjustable window, a PT3/8 port, and a 25 mm piston rod. The -S magnet is present for switch sensing, and the rod end utilizes a female M14x1.5 thread. Remember that a plain cylinder does not hold its load if air pressure drops or the valve centers; the bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 45–65 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-20S FAQ

The M20x1.5 screw mechanically shortens the extend stroke from the 65 mm maximum down to 45 mm without changing the force output. The built-in magnet works with AirTAC reed or electronic switches for position sensing, but the screw itself is a stop, not a mid-stroke lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X65-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.