
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-30B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X65-30B is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that lets you dial the extend stop down to any position between 35 and 65 mm directly on your machine. The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit.
This specific SKU includes a male-thread M22x1.5 piston rod and a fixed NBR bumper at each end to decelerate the stroke. It operates without a piston magnet, so position sensing is not supported on this base unit. Operating pressure ranges from 0.15 to 1.0 MPa, with a proof pressure of 1.5 MPa and a speed range of 30-500 mm/s.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 65 mm |
| Adjustable range | 35 – 65 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 35-65 mm extend stop to set precise 2513.3 N pressing depth for various material thicknesses without changing machine hardware.
Shift the extend stroke within the 30 mm window to handle different package sizes on a compact line where axial mounting depth is restricted.
This 80 mm bore is ideal if the 63 mm variant lacks thrust but the 100 mm frame is physically too large.
Choose this cylinder if your fixture requires frequent on-site stroke tuning to accommodate different part heights without swapping shims or components. Confirm your setup requires an 80 mm bore, a 65 mm maximum stroke with a 30 mm window, a PT3/8 air port, and the male M22x1.5 rod end. Note that a plain cylinder does not hold a load if air pressure drops or the valve is centred; for vertical load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa the push increases to 3518.6 N and the pull to 3175 N. The theoretical maximum push is 513 kgf at 1.0 MPa.
Turning the M20x1.5 external screw shortens the extend end position from the 65 mm maximum down to 35 mm. The retract stroke remains full, and the screw acts purely as a mechanical stop, not changing the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.