verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-40

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-40 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 65 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke65 mm
  • Adjustable range25–65 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$123.73 $131.23Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-40

The AirTAC SDAJ80X65-40 is a compact double-acting double-rod cylinder engineered for on-site stroke modification. An external M20x1.5 adjuster screw lets you dial the extend end-position anywhere between 25 and 65 mm, eliminating the need for shims or part swaps during commissioning.

This 80 mm bore actuator features a short riveted body that conserves axial mounting depth in tight machinery layouts. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s, and the PT3/8 air port matches the bore size. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to an -S variant.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-40 Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-40
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke65 mm
Adjustable range25 – 65 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-40

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×65Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-40 Is Used

precision_manufacturing

Press Fit Calibration

Dialing the extend stop from 25 to 65 mm allows operators to fine-tune pressing depth on bearing insertion lines without swapping mechanical spacers.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-40 the Right Cylinder?

Stepping down to the SDAJ63 yields 1558.6 N, whereas stepping up to the SDAJ100 provides 3927 N.

Choose this 80 mm bore if your fixture requires substantial push force alongside variable extend positioning. The 25-65 mm adjust window is perfect for trial positioning during setup. Keep in mind the fixed NBR bumper only decelerates the stroke end; it does not function as a lock. If your application must hold a load vertically during air loss or valve centering, integrate an external rod lock or pilot-operated check valve. Confirm your requirements for bore, stroke, window, PT3/8 port, female M14x1.5 rod thread, and the absence of a magnet.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–65 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-40 FAQ

Turning the R (M20x1.5) screw mechanically shortens the extend stroke within the 25 to 65 mm range. It acts only as an end stop and does not alter force. The cylinder cannot hold a load on air loss; use an external rod lock or pilot-operated check valve for load holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X65-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.