
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-40S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X65-40S is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop anywhere between 25 and 65 mm. Turning this R thread lets you fine-tune the working stroke directly on the machine, eliminating the need for shims or part swaps during setup.
Its short riveted body drastically reduces axial mounting depth, fitting where larger profile cylinders cannot. The unit includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, while a fixed NBR bumper handles end-of-stroke deceleration. Keep in mind this bumper is not an adjustable air cushion, and the cylinder will not hold a load if air pressure is lost.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 65 mm |
| Adjustable range | 25 – 65 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the extend stop to match changing package sizes on a packaging line, using the compact riveted body to fit tight transfer station footprints.
It is ideal for applications requiring frequent on-machine stroke tuning or changeovers. Remember that a plain cylinder does not hold position when air is lost or the valve is centered; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your bore, 65 mm max stroke, 40 mm window, PT3/8 port, -S magnet, and female M14x1.5 rod-end thread.
Quick checklist
This 80 mm bore cylinder features a PT3/8 air port.
The external M20x1.5 screw shortens the extend stroke by up to 40 mm, allowing usable extensions from 25 to 65 mm without changing parts. The -S option includes a built-in piston magnet for direct mounting of AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.