
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-50 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 15 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X65-50 is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop directly on your machine. You can set the forward end position anywhere between 15 and 65 mm without swapping shims or parts, making it ideal for frequent format changeovers. Retract travel remains full length.
The short riveted body drastically cuts axial mounting depth where a larger profile unit will not fit. End shock is handled by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 65 mm |
| Adjustable range | 15 – 65 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 15 to 65 mm extend stop during initial tooling commissioning to apply precise 2513.3 N clamping force without re-machining fixtures.
Fit the short riveted body into tight machine frames to execute heavy forming tasks, tweaking the 50 mm adjustment window as product variants change over.
When sizing this model, look at both adjacent bores.
Choose this specific 80 mm bore, 65 mm stroke, 50 mm window configuration when you need heavy thrust plus on-site stroke tuning. It uses a PT3/8 port and a 25 mm rod. Note that this base SKU lacks a piston magnet, so it cannot accept reed or electronic switches. Also, remember that the mechanical stop and fixed bumper do not hold a load on air loss; for vertical holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
This 80 mm bore cylinder uses a PT3/8 port.
Turning the external M20x1.5 screw shortens the forward stroke by up to 50 mm, allowing an extend range of 15 to 65 mm. This specific SKU lacks a piston magnet, so it cannot take magnetic switches; you would need the -S option for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.