verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-50S

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-50S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 15 to 65 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke65 mm
  • Adjustable range15–65 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$141.20 $148.70Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-50S

The AirTAC SDAJ80X65-50S is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that lets you dial the extend stop anywhere between 15 and 65 mm directly on the machine. The short riveted body conserves valuable axial mounting depth in tight fixtures where larger profile housings would never fit.

A fixed NBR bumper at each end manages end-of-stroke shock, but note this is a deceleration bumper, not an adjustable air cushion or a mid-stroke lock. This specific configuration includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches along the body grooves. With a 25 mm piston rod and PT3/8 air port, it handles substantial loads while operating at speeds between 30 and 500 mm/s.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-50S Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-50S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke65 mm
Adjustable range15 – 65 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-50S

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×65Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-50S Is Used

sync_alt

Multi-Format Changeovers

Quickly rotate the M20x1.5 adjuster screw to accommodate varying package heights on a packaging line, reducing mechanical setup time between production runs.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-50S the Right Cylinder?

Choose this 80 mm bore if your application demands that level of thrust within a confined footprint.

This model is ideal for lines requiring frequent on-site stroke tuning during product changeovers without swapping shims or components. Remember that a standard compact cylinder cannot hold a load if air pressure drops or the valve is centered; the bumper only decelerates near the end of travel. For suspended or vertical loads that must remain fixed upon air loss, integrate an external rod lock or a pilot-operated check valve. Configuration confirmed: 80 mm bore, 65 mm max stroke, 50 mm adjust window, PT3/8 port, -S magnet included, female M14x1.5 rod thread.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 15–65 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-50S FAQ

The external M20x1.5 screw shortens the extend stroke by up to 50 mm, allowing usable travel between 15 and 65 mm without altering the force output. The -S option adds a piston magnet for tracking position with AirTAC reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X65-50S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X65-50S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.