
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-10 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X70-10 is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that lets you dial the extend stop anywhere between 60 and 70 mm directly on the machine. Its short riveted body saves valuable axial mounting depth where a larger profile cylinder simply will not fit. The adjuster strictly sets the mechanical stop position; it does not alter the piston area, meaning force remains identical to a standard SDA of this bore.
End-of-stroke energy is managed by a fixed NBR bumper that decelerates the piston, which is not an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 70 mm |
| Adjustable range | 60 – 70 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on-site when switching product widths on a packaging line, using the M20x1.5 screw to reposition the diverter arm instantly.
Set exact downward travel endpoints for a 128.1 kg vertical lift fixture, relying on the fixed NBR bumper to absorb the final impact energy safely.
Choose this model if your assembly line requires frequent changeovers or trial positioning within that 60-70 mm window.
Confirm your parameters: 80 mm bore, 70 mm max stroke, 10 mm adjust window, PT3/8 port, female rod-end thread (M14x1.5), and no magnet. Note that a plain cylinder does not hold its load on air loss or valve centring—the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 513 kgf at 1.0 MPa.
Turning the external M20x1.5 screw shortens the extend stroke by up to 10 mm, giving a usable extend range of 60-70 mm. Retract remains full stroke. This SKU has no magnet, so it cannot take sensors unless you specify the -S option for reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.