
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-10B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 70 mm on the machine — no shims, no part change.
The short riveted body ensures robust structural integrity while keeping overall length to a minimum.
An external M20x1.5 adjustment screw lets you dial the extend end-position down by 10 mm, yielding a usable forward travel window of 60 to 70 mm directly on the machine. This SKU features a male M22x1.5 piston rod thread and lacks a piston magnet, meaning magnetic sensing is not supported. A fixed NBR bumper decelerates the stroke ends, operating reliably at speeds between 30 and 500 mm/s.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 70 mm |
| Adjustable range | 60 – 70 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Turn the M20x1.5 screw to micro-adjust the 60-70 mm extend stop during press-fit changeovers, ensuring precise seating without swapping mechanical shims.
Set the exact extend position on the packaging line to fold varying carton sizes, relying on the fixed NBR bumper to absorb end-of-stroke shock.
Choose this 80 mm bore when the smaller 63 mm lacks thrust or the 100 mm is too bulky.
This model is ideal for setups requiring on-site stroke tuning without part changes, specifically adjusting the extend stop between 60 and 70 mm. Confirm your requirements for the PT3/8 air port, the male M22x1.5 rod thread, and the 10 mm adjustment window. Note that a plain SDAJ does not hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The external M20x1.5 screw mechanically shortens the extend stroke by up to 10 mm, allowing you to set the forward stop anywhere between 60 and 70 mm. It sets the stop position only and does not alter the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.