verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-10S

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-10S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 70 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke70 mm
  • Adjustable range60–70 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$144.66 $152.16Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-10S

The AirTAC SDAJ80X70-10S is a compact double-acting double-rod cylinder featuring an on-site extend stop. By turning the M20x1.5 adjuster screw, you set the outward stroke anywhere between 60 and 70 mm without changing parts.

Its short riveted body saves valuable axial mounting depth where larger profile or round-body units fail to fit. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion, so for high-energy cycles you should slow the approach or add an external shock absorber. The integrated -S piston magnet supports AirTAC reed or electronic solid-state switches for exact end-position confirmation.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-10S Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-10S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke70 mm
Adjustable range60 – 70 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-10S

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×70Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-10S Is Used

precision_manufacturing

Heavy Press Fitment

Dialing the extend stop in 1 mm increments lets operators set precise 60-70 mm pressing depths for heavy bearings without machining custom spacers.

sync_alt

Tooling Changeovers

The 10 mm adjustment window allows rapid reconfiguration of end positions when switching between product variants on a high-force assembly line.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-10S the Right Cylinder?

Choose it when your setup demands on-site stroke tuning across that 60-70 mm window.

Confirm the 80 mm bore, 70 mm stroke, 10 mm adjustment window, PT3/8 air port, built-in magnet, and female M14x1.5 rod-end thread match your mounting requirements. Remember that a plain compact cylinder drifts on air loss or valve centering; the bumper only decelerates near the end. To hold a load without live pressure, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 60–70 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-10S FAQ

The theoretical maximum push is 513 kgf at 1.0 MPa.

The M20x1.5 external screw shortens the extend stop by up to 10 mm, giving a usable 60-70 mm range. The included -S magnet works with AirTAC reed or electronic switches, and the fixed NBR bumper handles end shock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X70-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.