
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-20 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X70-20 is a compact double-acting double-rod cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop between 50 and 70 mm directly on your machine.
Its short riveted body drastically reduces axial mounting depth where larger profile or round-body units cannot fit. End-of-stroke deceleration relies on a fixed NBR bumper rather than an adjustable air cushion, so for high-energy cycles you should slow the approach or mount an external shock absorber.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 70 mm |
| Adjustable range | 50 – 70 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the extend stop on the fly to accommodate different carton heights, ensuring the rod contacts the sealing head at the precise 60 mm mark required for each format changeover.
Choose this specific unit when your fixture setup demands frequent on-site stroke tuning across that 50-70 mm window.
Confirm the bore, 70 mm maximum stroke, 20 mm adjustment window, and PT3/8 port match your pneumatic layout. Note that this base SKU lacks a piston magnet, so it cannot accept reed or electronic switches; specify the -S option if sensing is required. Furthermore, a standard cylinder drifts when air is lost or the valve centres—the fixed bumper only decelerates near the end of travel and does not act as a lock, so deploy an external rod lock or pilot-operated check valve for load holding.
Quick checklist
Turning the M20x1.5 external screw shortens the extend end position from the 70 mm maximum down to 50 mm without changing parts. This sets the mechanical stop only; it does not alter the output force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.