
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-20B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X70-20B is a double-acting compact cylinder featuring a male-thread piston rod (M22x1.5) and an external extend stop. By turning the R (M20x1.5) adjustment screw, you set the extend position anywhere between 50 and 70 mm directly on the machine, avoiding shims or part swaps. The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit.
The unit relies on a fixed NBR bumper at each end to decelerate the stroke, operating at 30-500 mm/s across a 0.15-1.0 MPa pressure range. This SKU lacks a piston magnet, so it cannot host magnetic switches.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 70 mm |
| Adjustable range | 50 – 70 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 50-70 mm extend stop during press changeovers to seat bearings precisely without swapping mechanical spacers.
Choose the 80 mm bore when the smaller variant lacks thrust and the larger is physically too wide.
This configuration specifies a 70 mm maximum stroke with a 20 mm window, a PT3/8 air port, and a male M22x1.5 rod end. It is built for setups requiring frequent on-site stroke tuning. Note that a plain cylinder does not hold its load on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum is 513 kgf at 1.0 MPa.
The -B code denotes a male M22x1.5 piston rod. This SKU has no magnet, so reed or electronic switches cannot be fitted.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.