
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-20S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X70-20S is a compact double-acting double-rod cylinder featuring an external M20x1.5 adjuster screw that lets you dial the extend stop anywhere between 50 and 70 mm directly on the machine. The short riveted body significantly reduces axial mounting depth, fitting easily where round-body or larger profile cylinders cannot.
This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches along the body grooves. End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 70 mm |
| Adjustable range | 50 – 70 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 50 to 70 mm during product family swaps to reposition tooling quickly without disassembling the pneumatic assembly.
Set precise mechanical stops for pressing bearings or pins, leveraging the fixed NBR bumper to absorb the end shock of the 80 mm bore.
If your application requires less force, the neighbouring SDAJ63 offers 1558.6 N at 0.5 MPa; if you need substantially more power, stepping up to the SDAJ100 provides 3927 N at 0.5 MPa. This specific model is configured with a 70 mm maximum stroke, a 20 mm adjustment window, a PT3/8 air port, a female M14x1.5 rod-end thread, and the -S magnet option.
Operators who frequently handle format changeovers or trial positioning will benefit from the on-machine extend tuning, eliminating the need for shims or part swaps. Remember that a plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the stroke end. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
Quick checklist
This 80 mm bore double-acting cylinder pushes 2513.3 N and pulls 2267.8 N at 0.5 MPa. At 0.7 MPa, push increases to 3518.6 N. The theoretical maximum push is 513 kgf at 1.0 MPa. The air port is PT3/8.
Turning the external M20x1.5 screw shortens the extend end-position by up to 20 mm, giving a usable extend range of 50 to 70 mm without changing force. The included -S magnet allows tracking via AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.