
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-40 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X70-40 is a double-acting compact cylinder featuring an external M20x1.5 R screw that dials the extend stop from 30 to 70 mm directly on your machine. The short riveted body drastically reduces axial mounting depth where larger profile or round-body units will not fit.
A fixed NBR bumper at each end handles end-of-stroke deceleration, meaning there is no adjustable air cushion to tune. Operating pressure spans 0.15 to 1.0 MPa, and the unit moves at 30-500 mm/s. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 70 mm |
| Adjustable range | 30 – 70 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the stroke on-site to deflect varying carton widths on a packaging line, relying on the fixed NBR bumper to absorb the impact of high-speed routing.
Choose the 80 mm bore when you need substantial force in a tight footprint.
Operators who require frequent changeovers or trial positioning will benefit from the 40 mm adjustment window. Confirm your required extend length falls between 30 and 70 mm, the PT3/8 port size is compatible, and the female M14x1.5 rod thread suits your linkage. Keep in mind a plain cylinder drifts when air is lost or the valve is centered; the bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The adjustment screw does not alter these force values.
Turning the M20x1.5 R screw shortens the extend end-position by up to 40 mm, allowing you to set the stroke anywhere between 30 and 70 mm on the machine. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you would need the -S option for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.