
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-40B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X70-40B is a compact double-acting double-rod cylinder featuring an external M20x1.5 adjustment screw. Turning this R thread lets you dial the extend end-position on-site across a 30 to 70 mm window, removing the need for shims or part swaps during commissioning.
Designed to save axial mounting depth where round-body or profile cylinders cannot fit, this riveted-body unit integrates a fixed NBR bumper at each end to decelerate the stroke. This specific SKU includes a male M22x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without upgrading to the -S variant. Operating pressure spans 0.15 to 1.0 MPa, with a speed range of 30-500 mm/s.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X70-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 70 mm |
| Adjustable range | 30 – 70 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M22x1.5 rod reach on the fly to handle varying pallet widths on a packaging line, ensuring positive contact without over-travel.
Set a safe upper travel limit for a 128.1 kg lift mechanism, using the external screw to fine-tune the exact raise height while relying on external checks for holding.
When sizing this 80 mm bore actuator, evaluate your force requirements bidirectionally. Choose this specific unit when your fixture requires on-site extend tuning between 30 and 70 mm.
Confirm the bore size, 70 mm maximum stroke, 40 mm adjustment window, and PT3/8 air port match your pneumatic layout. This variant features a male M22x1.5 rod end, so ensure your mating clevis or load coupling accommodates external threads. Note that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed NBR bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
This 80 mm bore cylinder uses a PT3/8 air port.
The M20x1.5 adjuster screw shortens the extend stroke by up to 40 mm, providing a usable extend range of 30 to 70 mm without altering force. This SKU features a male M22x1.5 piston rod thread and lacks a magnet, so it cannot support magnetic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.