
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-10 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 65 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X75-10 is a double-acting, double-rod compact cylinder featuring an external extend stop. A M20x1.5 adjuster screw lets you dial the outward travel down from the 75 mm maximum to 65 mm directly on the machine, eliminating the need for shims or part swaps during commissioning.
This 80 mm bore actuator utilizes a short riveted body to minimize axial mounting depth in tight machinery layouts. End-of-stroke deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s, and the PT3/8 air port is fixed for this bore size. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 75 mm |
| Adjustable range | 65 – 75 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the diverter arm extension on the fly during product changeover, using the M20x1.5 screw to accommodate varying pallet widths while maintaining a compact footprint.
Iterate on the end position during new assembly machine commissioning, safely testing intermediate extend lengths between 65 and 75 mm before locking down the final mechanical stop.
Stepping down to the SDAJ63 yields 1558.6 N, whereas stepping up to the SDAJ100 provides 3927 N.
This actuator is ideal for setups requiring on-site stroke tuning across the 65-75 mm range. Confirm your bore, 75 mm maximum stroke, 10 mm adjustment window, PT3/8 port, and female rod-end thread (M14x1.5) match your layout. Remember that a standard cylinder does not hold position if air pressure drops or the valve centers; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 513 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and runs at speeds from 30 to 500 mm/s.
The M20x1.5 R screw mechanically shortens the extend stop from the 75 mm maximum down to 65 mm without altering the output force. This SKU does not include a piston magnet, so it cannot accept AirTAC reed or electronic switches; you must select the -S magnet option for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.