
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-10B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 65 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X75-10B is a double-acting, double-rod compact cylinder featuring an external M20x1.5 adjustment screw. This mechanism allows you to dial the extend stop down from the 75mm maximum to a 65mm minimum directly on the machine, eliminating the need for shims or part swaps during setup.
Designed with a short riveted body, this unit saves valuable axial mounting depth where larger profile or round-body cylinders cannot fit. It uses a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. This specific SKU includes a male M22x1.5 piston rod thread and lacks a piston magnet, meaning it cannot support magnetic sensing without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 75 mm |
| Adjustable range | 65 – 75 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 65-75mm extend stop on heavy press operations to perfect component seating without swapping mechanical spacers.
Install this riveted body where axial depth is restricted, utilizing the male M22x1.5 rod for robust, high-force tooling connections.
Choose this specific configuration if your fixture requires a male M22x1.5 rod end and you need to fine-tune the extend position within the 65-75mm range.
Keep in mind that a plain SDAJ does not hold a load if air pressure is lost or the valve is centered; the piston will drift, as the fixed bumper only decelerates near the end of travel and the adjuster acts as a mechanical stop rather than a lock. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve. Confirm your bore, 75mm stroke, 10mm adjustment window, PT3/8 port, and male rod thread before finalizing your assembly.
Quick checklist
Turning the M20x1.5 screw shortens the extend stop by up to 10mm, giving a usable range of 65-75mm. This acts purely as a mechanical stop and does not lock the piston; for load holding without air pressure, use an external rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.