
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-10S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 65 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X75-10S is a compact double-acting double-rod cylinder engineered for on-site extend stop calibration. By turning the external M20x1.5 adjuster screw, you can dial the forward stroke anywhere between 65 and 75 mm without swapping shims or components.
This riveted-body design saves crucial axial mounting depth in tight machinery layouts. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, meaning the adjuster acts strictly as a positioning stop and never as a mid-stroke lock. The integrated piston magnet supports AirTAC reed or electronic solid-state switches for precise end-position verification.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 75 mm |
| Adjustable range | 65 – 75 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the stroke length on-site to accommodate different package sizes on the line without changing hardware, relying on the fixed NBR bumper to absorb routing impacts.
Choose this specific configuration if your setup requires fine 10 mm extend tuning during frequent product changeovers.
Confirm the 80 mm bore, 75 mm maximum stroke, 10 mm adjust window, and PT3/8 port match your pneumatic supply. This variant includes the -S magnet for switch sensing and a female M14x1.5 rod-end thread. Remember that a standard compact cylinder cannot hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates the stroke end. For suspended loads, install an external rod lock or pilot-operated check valve.
Quick checklist
The air port is PT3/8.
The -S option provides a built-in piston magnet for direct mounting of AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.