
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-20 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X75-20 is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. A built-in M20x1.5 adjuster screw lets you dial the outward stroke anywhere between 55 and 75 mm directly on the machine, eliminating the need for shims or part swaps.
Its short riveted body significantly cuts axial mounting depth, fitting where larger profile cylinders cannot. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 75 mm |
| Adjustable range | 55 – 75 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the outward stroke on the fly to accommodate varying pallet heights on a packaging line, using the external M20x1.5 screw to fine-tune the mechanical stop position.
Choose this unit if your fixture requires frequent on-site stroke tuning across a 20 mm window. It uses a PT3/8 port and a female M14x1.5 rod-end thread. Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper and mechanical stop do not lock the load, so add an external rod lock or pilot-operated check valve if you need to hold position vertically.
Quick checklist
At 0.7 MPa the push is 3518.6 N and pull is 3175 N. The theoretical maximum push is 513 kgf at 1.0 MPa.
Turning the external M20x1.5 screw shortens the extend end position from the 75 mm maximum down to 55 mm, without changing the output force. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you must select the -S option for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.