verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-20S

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-20S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 75 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke75 mm
  • Adjustable range55–75 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$148.85 $156.35Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-20S

The AirTAC SDAJ80X75-20S is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop directly on your machine between 55 and 75 mm.

Its riveted body design minimizes axial mounting depth, fitting where larger profile cylinders cannot. The integrated -S piston magnet supports AirTAC reed or electronic switches for position sensing, while a fixed NBR bumper decelerates the end of stroke without acting as a lock.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-20S Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-20S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke75 mm
Adjustable range55 – 75 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-20S

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×75Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-20S Is Used

packaging

Carton Forming Adjustment

Tune the extend endpoint on packaging lines for varying carton depths, relying on the fixed NBR bumper to absorb end shock at operating speeds up to 500 mm/s.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-20S the Right Cylinder?

Choose this unit if your fixture requires frequent on-site stroke tuning or changeover. Remember that a plain cylinder drifts when air is lost or the valve is centered; the bumper only decelerates near the end, so add an external rod lock or pilot-operated check valve for load holding. Confirm your bore, 75 mm stroke, 20 mm window, PT3/8 port, -S magnet, and female M14x1.5 rod thread.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 55–75 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-20S FAQ

The M20x1.5 adjuster screw shortens the extend stop by up to 20 mm, yielding a usable 55-75 mm range without changing the force. The included -S magnet works with AirTAC reed or electronic switches for position feedback.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X75-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.