
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-20SB is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X75-20SB is a compact double-acting double-rod cylinder engineered for on-site extend positioning. An external M20x1.5 adjuster screw lets you dial the forward stop anywhere between 55 and 75 mm without swapping shims or parts.
This variant includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches, plus a male M22x1.5 threaded rod end (-B) for secure mechanical attachments. The short riveted body minimizes axial footprint where space is tight, while a fixed NBR bumper decelerates the piston near stroke ends. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 75 mm |
| Adjustable range | 55 – 75 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Speed up production line format changes by turning the external adjuster to fine-tune the extend endpoint, avoiding the need to swap out entire cylinders.
This SDAJ80X75-20SB bridges that gap, offering a theoretical maximum of 513 kgf at 1.0 MPa.
Choose this specific configuration if your fixture requires exact extend tuning during frequent changeovers. Confirm the 20 mm adjustment window, PT3/8 port, and the male M22x1.5 rod thread suit your tooling. Note that a plain cylinder drifts when air is lost or the valve centers—the fixed NBR bumper only decelerates near the end and is not a lock. For suspended loads, install an external rod lock or pilot-operated check valve.
Quick checklist
At 0.7 MPa, push increases to 3518.6 N and pull to 3175 N. The theoretical maximum push force is 513 kgf at 1.0 MPa.
The M20x1.5 screw shortens the extend stroke by up to 20 mm, yielding a usable 55-75 mm range; retract remains full. The included -S magnet works with AirTAC reed or electronic solid-state switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.