
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X75-30 is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop directly on your machine. You can tune the outward stroke anywhere between 45 and 75 mm without swapping shims or parts, making it ideal for high-mix production lines. Retract travel remains at the full 75 mm.
The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke energy is managed by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 75 mm |
| Adjustable range | 45 – 75 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the reject arm stroke precisely for varying pallet widths on the line, relying on the fixed NBR bumper to absorb the impact of high-speed routing tasks.
Set precise lower limits for assembly presses handling delicate components, using the M20x1.5 screw to find the perfect touch point without reprogramming the motion controller.
Choose this specific configuration if your fixture requires frequent on-site stroke tuning across a 45 to 75 mm window. It features a PT3/8 port, a 25 mm rod, and female M14x1.5 rod-end threads. Note that this SKU lacks the -S magnet, so it cannot accept reed or electronic switches. Furthermore, the plain cylinder does not hold position on air loss; integrate an external rod lock or pilot-operated check valve if load holding is required.
Quick checklist
This 80 mm bore cylinder uses a PT3/8 air port.
Turning the external R (M20x1.5) screw mechanically shortens the extend end-position by up to 30 mm, giving a usable outward range of 45 to 75 mm. It acts only as a hard stop and does not lock the piston mid-stroke or hold the load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.