verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30B

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 75 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke75 mm
  • Adjustable range45–75 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$130.70 $138.20Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30B

The AirTAC SDAJ80X75-30B is a compact double-acting double-rod cylinder featuring an on-site extend stop. By turning the external M20x1.5 adjuster screw, you set the forward end position anywhere between 45 and 75 mm without changing parts.

This variant uses a male M22x1.5 piston rod thread and lacks a piston magnet. Its short riveted body minimizes axial mounting depth where larger profile cylinders cannot fit. End shock is handled solely by a fixed NBR bumper, meaning there is no adjustable air cushion.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30B Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke75 mm
Adjustable range45 – 75 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30B

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×75Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30B Is Used

straighten

Press Fit Tuning

Dial the extend stop from 45 to 75 mm to set precise pressing depth for heavy 128 kg assemblies without swapping mechanical spacers.

vertical_align_center

Vertical Lift Stops

Raise platforms safely with the male M22x1.5 rod, adjusting the mechanical stop to prevent overtravel while relying on a check valve for holding.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30B the Right Cylinder?

Choose this model when your setup requires heavy push force plus the ability to tune the forward stroke on the machine.

Confirm the 75 mm maximum stroke, 30 mm adjustment window, and PT3/8 port. This specific SKU includes the male M22x1.5 rod end (-B) and no magnet. Note that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 45–75 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30B FAQ

This 80 mm bore cylinder pushes 2513.3 N and pulls 2267.8 N at 0.5 MPa. At 0.7 MPa, push is 3518.6 N. The theoretical maximum push is 513 kgf at 1.0 MPa. The air port is PT3/8.

Turning the M20x1.5 screw shortens the extend stroke by up to 30 mm, giving a usable range of 45 to 75 mm. The screw is a mechanical stop, not a mid-stroke lock. The cylinder cannot hold a load on air loss without an external rod lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X75-30B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.