
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X75-30S is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop from 45 to 75 mm directly on your equipment.
Its short riveted body significantly reduces axial mounting depth where larger profile or round-body units cannot fit. End-of-travel deceleration relies on a fixed NBR bumper, and the included -S piston magnet supports position sensing via reed or electronic switches.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 75 mm |
| Adjustable range | 45 – 75 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 45-75 mm extend stop on the fly to accommodate varying material thicknesses in high-force press operations without changing hardware.
If your application requires less force, the SDAJ63 provides 1558.6 N; for heavier demands, the SDAJ100 offers 3927 N. The 45-75 mm adjustable window is perfect for lines needing frequent changeovers or trial positioning without swapping parts.
Keep in mind the fixed NBR bumper only decelerates the stroke end and does not act as a lock. If you need to hold a vertical load of roughly 128.1 kg against gravity without constant air pressure, install an external rod lock or pilot-operated check valve. This configuration includes the -S magnet for sensors and a female M14x1.5 rod-end thread with a PT3/8 port.
Quick checklist
The theoretical maximum push force is 513 kgf at 1.0 MPa.
The M20x1.5 adjuster screw mechanically shortens the extend end-position anywhere between 45 and 75 mm without affecting force. The built-in -S magnet allows tracking by AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.