verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30SB

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30SB is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 75 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke75 mm
  • Adjustable range45–75 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$148.85 $156.35Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30SB

The AirTAC SDAJ80X75-30SB is a compact double-acting double-rod cylinder engineered with an external adjustable extend stop. By turning the R (M20x1.5) screw, technicians can shorten the forward stroke directly on the machine, tuning the end position anywhere between 45 and 75 mm without swapping shims or parts.

This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male-thread piston rod (-B, M22x1.5) for secure tooling attachment. The short riveted body saves axial mounting depth where a larger profile cylinder will not fit, while a fixed NBR bumper at each end decelerates the stroke end. Operating pressure spans 0.15 to 1.0 MPa, with a speed range of 30-500 mm/s.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30SB Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke75 mm
Adjustable range45 – 75 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30SB

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×75Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30SB Is Used

packaging

Variable Depth Flap Folding

Adjust the mechanical stop on the fly for different carton heights, using the male M22x1.5 rod thread to mount custom folding arms.

factory

Heavy Fixture Clamping

Secure large weldments with up to 513 kgf of clamping force at 1.0 MPa, fine-tuning the clamping depth during initial commissioning.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30SB the Right Cylinder?

When sizing this unit, evaluate both neighbouring bores against your exact force requirements. Stepping up, the SDAJ100 delivers 3927 N at 0.5 MPa, offering substantially more power if your fixture demands it.

This specific configuration features a PT3/8 port, a 25 mm piston rod, and a 30 mm adjustment window. Confirm your setup requires on-machine stroke tuning between 45 and 75 mm, and note the male M22x1.5 rod thread. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For a held load without live pressure, specify an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 45–75 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30SB FAQ

Turning the R (M20x1.5) screw shortens the extend stroke by up to 30 mm, allowing on-site positioning between 45 and 75 mm. The included -S magnet enables position sensing with AirTAC reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-30SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X75-30SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.