
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-40B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X75-40B is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop precisely between 35 and 75 mm. This SKU uses a male M22x1.5 piston rod end for direct external mounting.
Its short riveted body minimizes axial footprint where space is tight, while a fixed NBR bumper decelerates the piston at the extremes. Operating speed spans 30-500 mm/s. Note this variant lacks a piston magnet, so it cannot host reed or solid-state switches.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 75 mm |
| Adjustable range | 35 – 75 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 35-75 mm extend stop during setup to apply precise 2513.3 N clamping force without swapping mechanical spacers.
Turn the M20x1.5 screw on the fly to accommodate different product sizes on high-mix assembly lines.
Choose this male-rod (-B) configuration for applications needing a threaded attachment point. The on-machine adjustability is ideal for lines requiring frequent format changeovers. Remember that a plain cylinder drifts when air is lost or valves center; the bumper only decelerates near the end of travel and is not a lock. For suspended loads, integrate an external rod lock or pilot-operated check valve. Confirm your PT3/8 port and 40 mm adjustment window before checkout.
Quick checklist
The theoretical maximum push is 513 kgf at 1.0 MPa.
The external M20x1.5 screw mechanically limits the extend stroke, allowing you to set the end position anywhere between 35 and 75 mm.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.