
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-75 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X75-75 is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop from 0 to 75 mm directly on your machine. This on-machine tuning eliminates shims or part changes during frequent format changeovers. The short riveted body significantly saves axial mounting depth where a larger profile cylinder will not fit.
End-of-stroke shock is handled by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion. Operating speed spans 30-500 mm/s.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-75 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 75 mm |
| Adjustable range | 0 – 75 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the extend end-stop during product changeovers to press bearings to exact depths, relying on the fixed NBR bumper to absorb end shock.
Confirm your requirements for an 80 mm bore, 75 mm maximum stroke, 75 mm adjust window, and a PT3/8 air port. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; select the -S variant if sensing is required. Note that a plain cylinder does not hold position on air loss—add an external rod lock or pilot-operated check valve for suspended loads.
Quick checklist
The air port is PT3/8.
The M20x1.5 adjuster screw mechanically shortens the extend stroke by up to 75 mm on-site without changing the force. It is a stop, not a mid-stroke lock; the cylinder will drift on air loss, so use an external rod lock for load holding. This SKU has no magnet for sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.