
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-75S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X75-75S is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that lets you dial the extend stop from 0 to 75 mm directly on your machinery. The short riveted body drastically reduces axial mounting depth, fitting where larger profile or round-body cylinders cannot. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
Equipped with a built-in piston magnet (-S), this unit supports AirTAC reed or electronic solid-state switches mounted in the body grooves for precise position sensing. Operating pressure spans 0.15 to 1.0 MPa, and the PT3/8 port feeds a robust 25 mm piston rod. The mechanical stop is not a mid-stroke lock, so the piston will drift if air pressure is lost or the valve is centered.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 75 mm |
| Adjustable range | 0 – 75 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the stroke on-site to handle changing package sizes on the line, using the fixed NBR bumper to absorb the impact of high-speed sorting.
Set precise lifting heights up to 75 mm for 128.1 kg loads, ensuring the short riveted body fits tight vertical elevator spaces.
Choose this specific model if your assembly line requires frequent changeovers or trial positioning that benefits from on-site stroke tuning without swapping shims or parts.
Confirm your parameters: an 80 mm bore, 75 mm maximum stroke, 75 mm adjust window, and a PT3/8 port. The -S code ensures you have the magnet for reed or electronic sensing, while the female M14x1.5 rod-end thread (or male M22x1.5 if specified) handles high axial loads. Remember that a plain cylinder does not hold position upon air loss; for load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
At 0.5 MPa, push is 2513.3 N and pull is 2267.8 N. At 0.7 MPa, push is 3518.6 N and pull is 3175 N. The theoretical maximum push is 513 kgf at 1.0 MPa.
The M20x1.5 R screw mechanically shortens the extend stroke from 0 to 75 mm without changing the force. The -S option provides a built-in magnet for AirTAC reed or electronic switches; the adjuster is a stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.