
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-75SB is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X75-75SB is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop anywhere between 0 and 75 mm directly on your machine. The short riveted body drastically reduces axial mounting depth, fitting into tight spaces where larger profile cylinders cannot.
This specific configuration includes a male M22x1.5 piston rod thread and a built-in magnet for position sensing. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X75-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 75 mm |
| Adjustable range | 0 – 75 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 0-75 mm extend stop on the fly to set precise pressing depths for varied material batches without swapping mechanical shims.
Lift loads up to 128.1 kg safely; the fixed NBR bumper absorbs the end shock while the male M22x1.5 rod secures the heavy payload.
It is ideal for setups requiring frequent on-site stroke tuning without part changes.
Confirm the 80 mm bore, 75 mm maximum stroke, 75 mm adjustment window, and PT3/8 air port. This variant includes the -S magnet for AirTAC reed or electronic switches and the -B male M22x1.5 rod end. Note that a plain cylinder does not hold a load if air pressure drops; for vertical load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 513 kgf at 1.0 MPa.
The M20x1.5 adjuster screw mechanically shortens the extend stroke by up to 75 mm on-site without changing the force. The included -S magnet enables position detection using either AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.