
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-10 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X80-10 is a double-acting compact cylinder featuring an on-site adjustable extend stop. By turning the M20x1.5 adjuster screw, you can dial the outward stroke anywhere between 70 and 80 mm without swapping shims or components.
Its short riveted body drastically cuts axial mounting depth, fitting where round-body or profile cylinders cannot. The unit relies on a fixed NBR bumper to decelerate the stroke end rather than an adjustable air cushion. Operating pressure spans 0.15 to 1.0 MPa, and the PT3/8 port feeds a 25 mm piston rod engineered to handle heavy loads while avoiding side load.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 80 mm |
| Adjustable range | 70 – 80 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the final 70-80 mm extend position during press tooling changeovers, using the M20x1.5 screw to set the exact contact point without disassembling the fixture.
Adjust the downward reach on assembly lines for varying product heights, saving axial space in tight cell layouts thanks to the compact riveted body design.
This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; select the -S variant if sensing is required. Confirm your parameters: 80 mm bore, 80 mm maximum stroke, 10 mm adjustment window, PT3/8 port, and a female M14x1.5 rod-end thread. Remember that a plain cylinder drifts on air loss or valve centring, so deploy an external rod lock or pilot-operated check valve for load holding.
Quick checklist
The external M20x1.5 screw acts as a mechanical stop, allowing you to shorten the extend stroke on-site from the 80 mm maximum down to 70 mm. It sets the end position without altering the force, and the fixed NBR bumper handles end deceleration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.