
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-100S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X80-100S is a compact double-acting double-rod cylinder engineered for on-site extend positioning. An external M20x1.5 adjuster screw lets you dial the forward stop anywhere between 0 and 80 mm, eliminating the need for shims or part swaps during changeovers.
Built with a short riveted body, this unit saves axial mounting depth where round-body or profile cylinders will not fit. The 25 mm rod handles high thrust, while a fixed NBR bumper decelerates the stroke end. Equipped with a built-in magnet (-S), it supports AirTAC reed or electronic switches for position feedback.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-100S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 80 mm |
| Adjustable range | 0 – 80 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the extend position on-site for different carton widths on a packaging line, relying on the fixed NBR bumper to absorb the 128.1 kg dynamic load impact.
Fine-tune lift heights in vertical material handling setups where the short riveted body saves axial depth and the -S magnet confirms end positions via electronic switches.
When sizing this 80 mm bore, compare thrust in both directions.
Choose this specific configuration when you need extensive on-site stroke tuning across the full 0-80 mm window. It features a PT3/8 port, a female M14x1.5 rod-end thread, and the -S magnet for sensing. Remember that a plain cylinder does not hold its load on air loss or when a valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
Turning the external M20x1.5 screw shortens the extend stop by up to 100 mm, allowing usable forward travel from 0 to 80 mm. The screw acts strictly as a mechanical stop and does not alter force or lock mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.