
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-10B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X80-10B is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop precisely between 70 and 80 mm. Its riveted body design drastically reduces axial mounting depth compared to round-body alternatives, fitting into tight machinery footprints.
This specific SKU includes a male M22x1.5 piston rod end and lacks a piston magnet, meaning it cannot host reed or electronic switches without changing to an -S variant. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, which adequately absorbs shock at standard operating speeds up to 500 mm/s.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 80 mm |
| Adjustable range | 70 – 80 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 70-80 mm extend stop during press changeovers to accommodate varying insert depths without swapping mechanical shims.
Leverage the 128.1 kg vertical lift capacity to raise pallets, using the male M22x1.5 rod to secure heavy tooling while fine-tuning the upper stop.
Fit the short riveted body into dense assembly cells where axial space is restricted, applying 2513.3 N of clamping force at 0.5 MPa.
Choose this configuration if your fixture requires on-site extend tuning within that 70-80 mm window to perfect a pressing or clamping position. Note that a plain cylinder drifts when air is lost or the valve centers, as the fixed NBR bumper only decelerates the stroke end and does not act as a lock; utilize an external rod lock or pilot-operated check valve for secure load holding. Confirm your setup accommodates the PT3/8 air port, the 10 mm adjustment window, and the male M22x1.5 rod thread.
Quick checklist
It operates between 0.15 and 1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
Turning the external M20x1.5 adjuster screw shortens the extend stroke by up to 10 mm, allowing on-site tuning between 70 and 80 mm without affecting force. This specific SKU lacks a piston magnet, so it cannot support reed or electronic switches; you must select an -S variant for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.