
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-10S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X80-10S is a double-acting compact cylinder featuring an external M20x1.5 R-thread adjuster screw that dials the extend stop from 70 to 80 mm directly on your machine.
Its short riveted body drastically reduces axial mounting depth where larger profile or round-body units fail to fit. The unit includes a fixed NBR bumper to decelerate the stroke end, and the -S code denotes a built-in piston magnet for AirTAC reed or electronic solid-state switches.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 80 mm |
| Adjustable range | 70 – 80 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 70-80 mm extend stop during initial tooling setup to perfect the pressing depth of heavy bearings without machining new spacers.
Adjust the extend position on the fly to accommodate varying box heights, relying on the fixed NBR bumper to absorb the end-of-stroke shock.
Choose this specific unit when setups demand on-site stroke tuning across that 70-80 mm window.
Confirm the 80 mm bore, 80 mm maximum stroke, 10 mm adjustment window, PT3/8 air port, built-in S magnet, and female M14x1.5 rod-end thread. Note that a plain cylinder does not hold a load on air loss or valve centre—install an external rod lock or pilot-operated check valve for secure positioning.
Quick checklist
The M20x1.5 R-thread screw shortens the extend stop by up to 10 mm (usable range 70-80 mm) without changing the force. The built-in S magnet enables position detection using AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.