
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-20 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X80-20 is a double-acting, double-rod compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop from 60 to 80 mm directly on your equipment. Retract travel remains full length.
This riveted-body design saves substantial axial mounting depth where a larger profile cylinder cannot fit, while a fixed NBR bumper at each end handles end-of-stroke deceleration. Operating pressure spans 0.15 to 1.0 MPa, and the PT3/8 port matches the 80 mm bore specification. Note this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 80 mm |
| Adjustable range | 60 – 80 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 60-80 mm extend stop during machine commissioning to precisely seat heavy bearings without re-machining hard stops.
Choose this model if your assembly line requires frequent on-machine stroke tuning to accommodate varied part heights.
Confirm your parameters: an 80 mm bore, 80 mm maximum stroke with a 20 mm adjust window, PT3/8 porting, and a female M14x1.5 rod-end thread on a 25 mm rod. This base configuration ships without a magnet; select the -S variant if you require sensing capabilities. Remember that a plain cylinder does not hold position upon air loss or valve centring—the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa, push increases to 3518.6 N and pull to 3175 N. The theoretical maximum push is 513 kgf at 1.0 MPa.
Turning the M20x1.5 adjuster screw shortens the extend stroke by up to 20 mm, allowing you to set the stop anywhere between 60 and 80 mm. This mechanical stop does not alter the output force, and the retract stroke remains full length.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.