verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-20B

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-20B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 80 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke80 mm
  • Adjustable range60–80 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$134.22 $141.72Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-20B

The AirTAC SDAJ80X80-20B is a double-acting, double-rod compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop from 60 to 80 mm directly on your machine.

Its short riveted body drastically reduces axial mounting depth where round-body or larger profile units will not fit. This specific SKU includes a male M22x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches. End-of-stroke deceleration is handled by a fixed NBR bumper, not an adjustable air cushion.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-20B Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke80 mm
Adjustable range60 – 80 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-20B

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×80Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-20B Is Used

precision_manufacturing

Heavy Press Tuning

Dial in the 60-80 mm extend stop on a stamping fixture to accommodate different material thicknesses without swapping mechanical spacers.

factory

Compact Clamp Setup

Fit the short riveted body into tight machine cells, adjusting the extend position by up to 20 mm during line changeovers to seat parts accurately.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-20B the Right Cylinder?

Choose this model if your fixture requires on-site extend tuning between 60 and 80 mm.

Confirm your parameters require a 20 mm adjustment window, an 80 mm maximum stroke, and a PT3/8 air port. The male M22x1.5 rod end suits heavy-duty attachments, but ensure side loading is minimized. Note that a plain SDAJ does not hold position upon air loss or valve centering—the piston drifts and the fixed bumper only decelerates near the end of travel. For suspended loads, integrate an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 60–80 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-20B FAQ

The M20x1.5 screw mechanically shortens the extend endpoint from 80 mm down to 60 mm without changing the force. It is a stop, not a lock; the cylinder cannot hold a load on air loss, and end deceleration relies on a fixed NBR bumper.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-20B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X80-20B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.