verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-30B

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-30B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 80 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke80 mm
  • Adjustable range50–80 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$134.22 $141.72Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-30B

The AirTAC SDAJ80X80-30B is a double-acting compact cylinder featuring an external extend stop. An M20x1.5 adjuster screw lets you dial the outward stroke down from the 80 mm maximum to a 50 mm minimum directly at the machine, eliminating the need for shims or parts swapping.

Its short riveted body minimizes axial mounting depth, fitting where round-body or profile cylinders cannot. This specific SKU includes a male-threaded M22x1.5 piston rod for secure mechanical attachment and uses a PT3/8 air port. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a locking device.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-30B Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-30B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke80 mm
Adjustable range50 – 80 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-30B

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×80Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-30B Is Used

precision_manufacturing

Heavy Press Tonnage Setup

Dial in the 50 to 80 mm extend stop on the fly to set precise forming depth on heavy press tooling without disassembling the fixture.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-30B the Right Cylinder?

When sizing this unit, evaluate both neighboring bores. Choose this model for heavy changeover lines requiring frequent on-site stroke tuning between 50 and 80 mm.

Verify your parameters: 80 mm bore, 80 mm max stroke, 30 mm adjustment window, PT3/8 port, and the male M22x1.5 rod thread. Note that this SKU lacks a piston magnet, so position sensing is unavailable unless you specify the -S variant. A plain cylinder will not hold a load if air pressure drops or the valve centers; the piston drifts, and the bumper only decelerates near the end. For suspended loads, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 50–80 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-30B FAQ

At 0.7 MPa, push increases to 3518.6 N. The theoretical maximum push is 513 kgf at 1.0 MPa.

Turning the M20x1.5 external screw shortens the extend stop from the 80 mm maximum down to a 50 mm minimum. The retract stroke remains full. This mechanism sets the mechanical stop and does not alter force or lock the piston mid-stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-30B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X80-30B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.