
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-40 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X80-40 is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop directly on your machine. You can tune the forward stroke anywhere between 40 and 80 mm without swapping shims or parts, making it perfect for heavy-duty changeovers. Retract travel remains full length.
End shock is managed by a fixed NBR bumper rather than an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 80 mm |
| Adjustable range | 40 – 80 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 40-80 mm extend stop to set precise insertion depths for heavy bearing press fits without reprogramming motion controllers.
Quickly adjust the forward endpoint during production line format changes to accommodate varying large component widths.
Choose this specific configuration if your fixture requires frequent on-site stroke tuning across a 40 mm window. Confirm your setup needs an 80 mm bore, 80 mm maximum stroke, PT3/8 port, and female M14x1.5 rod thread. Because this variant has no magnet, position sensing is unavailable. Remember that the mechanical stop and fixed bumper do not secure the load on air loss; install an external rod lock or pilot-operated check valve for holding.
Quick checklist
Turning the M20x1.5 external screw shortens the extend endpoint from the 80 mm maximum down to 40 mm. The retract stroke stays full, and the adjuster sets the mechanical stop without altering the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.