
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-40B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X80-40B is a double-acting, double-rod compact cylinder featuring an external M20x1.5 adjustment screw that dials the extend stop directly on your machine. You can tune the outward stroke anywhere between 40 and 80 mm without swapping shims or parts, making it ideal for heavy changeovers. The short riveted body conserves axial mounting depth where a longer round-body unit will not fit.
This specific SKU uses a male M22x1.5 threaded rod end and lacks a piston magnet, meaning it cannot host reed or electronic switches. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 80 mm |
| Adjustable range | 40 – 80 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly alter the male M22x1.5 rod extension to accommodate varying pallet widths on a packaging line without changing cylinder hardware.
If your application requires more power, the SDAJ100 delivers 3927 N at the same pressure. This model is built for operators needing on-site stroke tuning during frequent format changes. Confirm your requirements for an 80 mm bore, 80 mm maximum stroke, 40 mm window, PT3/8 port, male M22x1.5 rod thread, and no magnet.
Keep in mind that a plain SDAJ does not hold position or carry a load if air pressure drops or the valve is centered. The piston will drift, and the fixed NBR bumper only decelerates near the end of travel. For secure load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
At 0.7 MPa, push increases to 3518.6 N. The theoretical maximum push is 513 kgf at 1.0 MPa.
The M20x1.5 adjuster screw mechanically shortens the extend stop from 80 mm down to 40 mm. It does not alter the force or lock the piston mid-stroke. Because this SKU lacks a magnet, it cannot use reed or electronic switches, and an external rod lock is required for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.