
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-50B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X80-50B is a compact double-acting double-rod cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop from 30 to 80 mm directly on your machine. The short riveted body minimizes axial mounting depth where round-body or profile alternatives will not fit.
This specific SKU includes a male M22x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without switching to an -S variant. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. Operating pressure spans 0.15 to 1.0 MPa, with a proof rating of 1.5 MPa across a -20 to +70 C temperature range.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 80 mm |
| Adjustable range | 30 – 80 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the extend depth on the fly for raising 128 kg loads, relying on the fixed NBR bumper to decelerate the payload near the end of travel.
Shorten the male M22x1.5 rod extension quickly during machine format changes, saving axial space in tight riveted-body assembly cells.
When sizing this unit, evaluate your thrust requirements bidirectionally.
This model is ideal for setups needing frequent on-machine stroke tuning between 30 and 80 mm without part changes. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding, install an external rod lock or a pilot-operated check valve. Confirm your requirements for the PT3/8 port, the 50 mm adjustment window, and the male M22x1.5 rod thread.
Quick checklist
Operating pressure is 0.15-1.0 MPa, speed is 30-500 mm/s, and the port size is PT3/8.
The external M20x1.5 screw shortens the extend stroke by up to 50 mm, allowing on-machine tuning between 30 and 80 mm without shims. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; you must select an -S variant for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.