verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-50S

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-50S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 80 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke80 mm
  • Adjustable range30–80 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$152.83 $160.33Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-50S

The AirTAC SDAJ80X80-50S is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. By turning the R (M20x1.5) screw, you can dial the extend position anywhere between 30 and 80 mm directly on the machine, avoiding part swaps.

Its short riveted body saves axial mounting depth where larger profile cylinders will not fit. The unit includes a built-in magnet (-S) for AirTAC reed or electronic switches, and relies on a fixed NBR bumper to decelerate the stroke end. Operating pressure ranges from 0.15 to 1.0 MPa, with a speed of 30-500 mm/s.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-50S Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-50S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke80 mm
Adjustable range30 – 80 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-50S

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×80Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-50S Is Used

conveyor_belt

High-Force Diverter Arms

Adjust the stroke on-site to reroute heavy pallets, using the compact riveted body to fit tight transfer stations where axial depth is restricted.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-50S the Right Cylinder?

The SDAJ80X80-50S is ideal for operators needing on-site stroke tuning during frequent changeovers.

Remember that a plain cylinder does not hold its load if air is lost or the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve. This configuration includes the -S magnet and uses a female M14x1.5 rod-end thread with a PT3/8 port.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 30–80 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-50S FAQ

At 0.7 MPa, push is 3518.6 N and pull is 3175 N. The theoretical maximum push is 513 kgf at 1.0 MPa.

The M20x1.5 adjuster screw shortens the extend stop by up to 50 mm, giving a usable range of 30-80 mm. It acts as a mechanical stop, not a mid-stroke lock. The built-in -S magnet allows tracking by AirTAC reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-50S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X80-50S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.