
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-75 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X80-75 is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop directly on your machine. You can set the outward stroke anywhere between 5 and 80 mm without swapping shims or parts.
Its short riveted body drastically cuts axial mounting depth where a larger profile cylinder cannot fit. A fixed NBR bumper decelerates the stroke end, and the 25 mm rod handles substantial loads. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-75 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 80 mm |
| Adjustable range | 5 – 80 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Swapping product formats quickly by turning the external adjuster rather than physically exchanging cylinder hardware on the machine.
Stepping down to SDAJ63 yields 1558.6 N, while stepping up to SDAJ100 provides 3927 N. This model suits setups needing on-site stroke tuning during frequent changeovers.
Confirm your requirements for an 80 mm bore, 80 mm maximum stroke, 75 mm adjust window, and PT3/8 port. This unit has no magnet (-S omitted) and a female M14x1.5 rod thread. Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
Turning the R (M20x1.5) screw shortens the extend stop by up to 75 mm, yielding a usable outward range of 5 to 80 mm. The retract stroke remains full. This sets the mechanical stop position and does not alter force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.