
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-75B is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X80-75B is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop from 5 to 80 mm directly on your machine. Its short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit, delivering substantial force in a tight footprint. The male-thread piston rod ends in M22x1.5 for secure mechanical linkage.
A fixed NBR bumper decelerates the stroke end to absorb shock. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 80 mm |
| Adjustable range | 5 – 80 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 5 to 80 mm extend stop during press changeovers to accommodate different material thicknesses without swapping hardware.
Utilize the short riveted body to fit high-thrust actuation into tight machine frames where standard profile cylinders fail to fit.
Choose this 80 mm bore when the smaller variant lacks thrust but the larger variant is physically too wide.
This configuration includes a 75 mm adjustment window, a PT3/8 air port, and a male M22x1.5 rod thread (option B). It is built for setups requiring frequent on-machine stroke tuning. Remember that a plain cylinder does not hold its load on air loss or valve centring; the piston drifts and the bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.
Quick checklist
The external M20x1.5 screw acts as a mechanical stop to shorten the extend stroke on-site between 5 and 80 mm. It sets the end position without changing the thrust, but it is not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.