
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-75S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X80-75S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M20x1.5) screw, you can dial the forward end-position anywhere between 5 and 80 mm directly on your machine, eliminating the need for shims or part swaps.
This 80 mm bore unit features a short riveted body that saves valuable axial mounting depth where a larger profile cylinder simply will not fit. It uses a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. The built-in piston magnet (-S) supports AirTAC reed or electronic switches for position sensing, while the 25 mm rod handles substantial loads.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 80 mm |
| Adjustable range | 5 – 80 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adapt clamping depth rapidly across different product families without changing hardware, relying on the compact riveted body to fit tight machine frames.
Choose this specific configuration if your assembly line requires frequent on-site stroke tuning across a wide 5 to 80 mm window. Confirm your setup needs an 80 mm bore, an 80 mm maximum stroke, a 75 mm adjustment range, and a PT3/8 air port. The -S magnet is included for switch integration, and the rod features a female M14x1.5 thread. Remember that a plain cylinder does not hold its load on air loss or valve centring; for vertical loads, install an external rod lock or pilot-operated check valve.
Quick checklist
At 0.7 MPa, push increases to 3518.6 N and pull to 3175 N. The theoretical maximum push is 513 kgf at 1.0 MPa.
Turning the M20x1.5 adjuster screw shortens the extend stroke by up to 75 mm, yielding a usable forward range of 5 to 80 mm without altering the force. The built-in -S magnet works with AirTAC reed or electronic switches for end-of-stroke detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.