
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-75SB is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X80-75SB is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop directly on your machine. You can set the forward end-position anywhere between 5 and 80 mm without swapping parts or adding shims, making it ideal for lines that require frequent changeovers. The retract stroke remains full length.
The short riveted body minimizes axial mounting depth where space is tight. It includes a built-in magnet for AirTAC reed or electronic switches and a male M22x1.5 piston rod thread. End shock is absorbed by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X80-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 80 mm |
| Adjustable range | 5 – 80 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Allows operators to fine-tune the 5 to 80 mm extend stop during press setup, ensuring precise seating force without changing out hard stops.
Speeds up product changeovers by letting technicians turn the M20x1.5 screw to set new extend endpoints quickly, minimizing machine downtime.
When sizing this 80 mm bore, verify your force requirements both ways. This SDAJ80X80-75SB configuration is specified with a 75 mm adjustment window, a PT3/8 port, a male M22x1.5 rod end, and the -S magnet for position sensing. It suits applications needing on-site stroke tuning to dial in exact positioning.
Keep in mind that a standard cylinder does not hold a load if air pressure drops or the valve is centered; the piston will drift. The fixed NBR bumper only decelerates the stroke near its end and the R screw acts as a mechanical stop, neither functions as a brake. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The external R (M20x1.5) screw shortens the extend stroke by up to 75 mm, allowing a usable range of 5 to 80 mm. The included -S magnet enables position detection using AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.