verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-20

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-20 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 65 to 85 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke85 mm
  • Adjustable range65–85 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$138.61 $146.11Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-20

The AirTAC SDAJ80X85-20 is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop directly on your machine, yielding a usable forward range of 65 to 85 mm without swapping shims or components. Retract travel remains full length.

Its short riveted body drastically cuts axial mounting depth where larger profile or round-body units cannot fit. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-20 Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-20
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke85 mm
Adjustable range65 – 85 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-20

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×85Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-20 Is Used

conveyor_belt

Pallet Diverter Setup

Adjust the forward thrust point on the fly during line changeovers to accommodate different pallet widths without fabricating new hard stops.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-20 the Right Cylinder?

Choose this 65-85 mm adjustable model for heavy fixtures requiring precise on-site endpoint tuning.

Confirm the 80 mm bore, 85 mm stroke, 20 mm window, PT3/8 port, and female rod-end thread meet your spatial and flow needs. Since this SKU has no -S magnet, sensing is impossible without changing the model. Remember that a plain cylinder drifts on air loss or valve centering; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 65–85 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-20 FAQ

This 80 mm bore double-acting cylinder uses a PT3/8 air port.

The M20x1.5 screw mechanically limits the extend endpoint, shortening the forward travel from 85 mm down to 65 mm. It does not alter force or lock the piston mid-stroke; the cylinder will drift if air is lost, so use an external rod lock for load holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X85-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X85-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.